OxyPure® Test and Performance Data

Here at Nuwave®, we want you to make the most informed decision possible.
That is why we are sharing all of our test and performance data for the OxyPure®.
Air Purifier Efficiency Test - Smoke, Dust, And Pollen
Intertek Testing Services

Using Tobacco Smoke (particle size: 0.10 - 1.0 microns), AC Fine Test Dust (particle size: 0.5 - 3.0 microns), and Paper Mulberry Pollen (particle size: 5 - 11 microns), the tests showed that on average, 100% of the smoke particles were gone within 50 minutes, 100% of the dust particles were gone within 50 minutes and 100% of the pollen particles were gone within 30 minutes in a 1008 ft3 room at maximum wind speed.

Air Purifier Efficiency Test - Formaldehyde
Intertek Testing Services

Intertek tested the OxyPure® Zero’s formaldehyde removal rate. The test shows that after 2 hours, 96.9% of the formaldehyde had been removed.

Air Purifier Efficiency Test - Ozone Emission
Intertek Testing Services

Ground level ozone concentrations (measured in parts per billion or ppb) varies depending on where you live. You can live in places where it is fairly low, like Oahu in Hawaii, which averages 49ppb1; or in places like Chicago, which averages 72ppb2. The national average hovers around 70ppb3, which is also the current EPA standard. The CARB-Certified OxyPure® Zero's Ozone filter drops the ozone concentration in your home to 1ppb, 70 times lower than current EPA limits and well below the ozone concentration you would find outside anywhere in the U.S.


These tests were conducted by a third-party laboratory under laboratory conditions. Nuwave LLC does not imply that these results can be replicated in a non-laboratory setting.